Store hours, Harbour House Sport Club, Lougharbour, Athy, Co Kildare.
Monday to Friday
11am - 5pm
During the Current Covid 19 restrictions in place at present Gunshop.ie will continue to provide Web orders to our Irish and European Customers only, As of 1 Nov 20, our administration team are working from home and phone lines may be busy, if you are unable to reach us by phone please email: firstname.lastname@example.org and one of the team will get back to you as soon as possible. We thank you for your patience and continued support during these challenging times and we hope all our clients and suppliers remain safe and healthy.
Depending on your receiver, if there is paint build up in the receiver mortise be sure to scrape that out. We recommend using an anti-seize compound to assist in installation. Anti-seize is readily available at automotive stores. It is best if you can get the barrel tenon started into the receiver mortise, then turn it over and tap the back of the receiver with a rubber mallet. Be sure to line the extractor slot up as you are installing the barrel. Your barrel is ready to shoot, just run two magazines through it before you really start looking at group size. Do this each time you change brands of ammunition as well. Keep the chamber clean, but don't clean the bore too much you will decrease accuracy. Depending on the ammo, clean the bore around every 500 rounds.